Many companies have the ability to create Custom Driveline by simply replacing parts of drive shafts. The u-joints, for example, are the first part of drive shafts that can go bad. This happens because the needles become dry and worn. This can eventually cause damage to the cap of your u-joint, which can then lead to havoc at the weld joint.
A new yoke should also be ordered after the u-joints have damaged the weld joint. By balancing and straightening the shafts, they create custom driveline. To prevent vibrations, the drive shafts must be within a tolerance range of 10000.
Image Source: Google
Straighten the driveshaft. Because the shaft isn't being straightened at 3500 rpm, there is a "jump rope effect". The balance procedures can then be performed after the straightening is completed by BTI.
Balancing is crucial as not all parts have been properly machined. The uneven metal in the drive shaft can be compensated by balancing. The extra weight will result in the driveshaft being equal length-wise.
How can you balance a custom driveline?
You can adjust the height of your suspension. The difference between the rear differentials (transmission) and the driveshaft may cause the driveshaft to become shorter or longer. This could lead to an imbalance that can cause the drive shaft to fall off.
The driveshaft should be extended to compensate for the difference in transmission and differential. To create more balance in automobiles and other applications that use drive shafts, it is best to extend the custom driveline.